Report #3224
DAX/2 menu times out and becomes unusable
| source | ender1flare resident |
|---|---|
| version | 0.3 |
| status | RES |
| priority | TRI |
| target fix | 0.3 |
| report date | 2024-02-04 01:08:41 |
| report | The DAX/2, which was recently updated to ARES, has a physical touchscreen menu. However, when not used for a period, the session for the menu times out, with no way to begin a new menu session, making the physical menu useless until the unit relogs. |
2 years ago
armelthelae:
Strangely, this issue also seems to be affecting the SXDjr and the Aide's touchscreen menus too. When the expiry hits, the next click on the menu will send them to a branded splash screen, but the menu never recovers and starts a new session.
2 years ago
armelthelae:
Issue can be temporarily resolved by either removing and readding the controller device or doing a =ddt reset to restart the whole kernel. More testing is being undertaken to see what else may work around it.
2 years ago
armelthelae:
Restarting the controller device through the device's menu also seems to reset the screen menu and allow interaction until the next timeout occurs.
2 years ago
rhet0rica:
This should be fixed now; go ahead and redeliver them.