Report #3480
'command' lightbus message not processed when sent by an external device
| source | armelthelae |
|---|---|
| version | 0.4.3 |
| status | RES |
| priority | TRI |
| target fix | 0.5.1 |
| report date | 2024-07-19 18:48:17 |
| report | Per the Public Bus information page, for a device to send a command to ARES as another user, it should use the 'command' active message over the lightbus. The only mention of this on the lightbus documentation appears to be for a response from the controller for when a specific @ command has been registered by a device, which the controller sends upon entry of this @ command. When passing "command [key] [command] [parameters]" from a registered device to the controller, no result or response is given. (Example: passing "command service interface restart" should, if this works as expected/implied by the Public Bus page, cause the HUD interface service to restart, resulting in a refresh of the HUD. Nothing results when passed in this manner.) |
2 months ago
armelthelae:
edit: Example should read 'passing "command [key] service interface restart"'
2 months ago
armelthelae:
This can be marked as "complete" or "not a bug" as instruction was given on how to utilize this command.
2 months ago
armelthelae:
This is now an issue again with 0.5.0