Report #3687
SynthOPTICAL Eyes not lighting up after Unit powers on
| source | ren |
|---|---|
| version | other |
| status | RES |
| priority | TRI |
| target fix | 0.5.7 |
| report date | 2026-01-23 10:53:56 |
| report | While the SynthOPTICAL eyes are active, if the unit powers off and powers back on, the eyes do not light up again until color changes are sent. This is surmised to be because no "color-q" is sent over the lightbus upon receiving an "on" over lightbus. Included is a small script I whipped up to address the problem for the moment: https://gist.github.com/aogummy/0f2dba5b603649c798e3ac9871fef932 |
3 months ago
rhet0rica:
The eyes are so old that they predate the "on" command. No other (current) product has this problem AFAIK. The actual message they need is "power 1.0", which was added in 0.5.7.